RM-Motors Exhaust silencer JEEP Grand Cherokee WJ/WG 4.0 4.7 - E002/60/450

Universal passage silencer made of stainless steel.

Can height / width – 130×220 mm Damper can length – 250, 300, 350, 400, 450, 500 mm Inlet diameter – 50, 60, 63.5, 70, 76, mm Inlet pipe length – 50 mm

The product is also available in a version with an embossing inside the passage that improves damping.

The product is not homologated and cannot be approved for use on public roads in the EU.

Universal elliptical silencer Made entirely of acid resistant steel T304 Fully welded, hand finished Fully manufactured in Poland 24 months warranty The interior of the silencer consists of: Stainless steel perforated tube Stainless steel wool resistant to 800 degrees Celsius Fire resistant glass mat with full hair Stamped bottom plate resistant to cracking

Muffler RM MOTORS JEEP COMMANDER V8 5.7 2006-2010 COMMANDER (XK, XH) 5.7 HEMI 4x4 (EZH) 5654ccm 347KM / 255kW 2009 / 06-2010 / 12 5.7 V8 4x4 (EZB) 5654ccm 326HP / 240kW 2005 / 09-2010 / 12

Muffler to be welded on in the place of the original one.

The diameter of the pipe, the dimensions of the muffler box and its length are selected in such a way so that the assembly of the silencer is as easy as possible.

Model: E002 / 60/450

Muffler dimensions: Can length - 450 mm Pipe diameter - 60 mm Muffler box width / height - 130x220 mm If you plan to modify your exhaust system to a greater extent, also increasing the diameter of the passage compared to the original, then we recommend ordering a model with an increased diameter of the passage 63.5 mm - model E002 / 63/450 70 mm - model E002 / 70/450 76 mm - model E002 / 76/450

However, if you want a more subdued sound, you can order the version with a silencing embossing, available at another auction, the EP002 / 60/450 model.

Or similarly for the version with embossing, other flow diameters: 63.5 mm - model E002 / 63/450 70 mm - model EP002 / 70/450 76 mm - model EP002 / 76/450

One side of the muffler with offset through tube outlet.

The through-tube diameter is always the same both inside and outside the muffler.

We do not use the tricks of upsetting and expanding the muffler nozzles, where from one muffler model several models with different pipe diameters are made, and in fact the diameter of the passage remains the same.

The other side of the muffler with the center entry of the through tube.

The silencer assembly side for the car as above - centrally inlet / outlet shifted.

In the case of universal use, the mounting side does not matter.

A silencer with a pass-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps).

Fully welded by welding robot, hand finished.

Each element of the product is made using CNC technology.

Crack-resistant embossed bottoms have been used.

Muffler RM MOTORS JEEP Cherokee XJ, 2.5 and 4.0 benz.

Below is a detailed list of models: 2.5 (EPE) 2469ccm 121KM / 89kW 1995 / 10-2001 / 09 2.5 SE (EPE) 2464ccm 118KM / 87kW 1996 / 10-1999 / 09 2.5 i 4x4 (EPE HX) 2469ccm 122KM / 90kW 1991 / 12-2001 / 09 4.0 i (MX) 3960ccm 184KM / 135kW 1999 / 02-2001 / 09 4.0 i (MX) 3964ccm 184KM / 135kW 1991 / 12-2001 / 09 4.0 i 4x4 (ERH) 3964ccm 178KM / 131kW 1995/01-2001/09

Muffler to be welded on in place of the original one.

Muffler RM MOTORS JEEP Grand Cherokee WJ/WG 4.0 4.7 Below is a detailed list of models: GRAND CHEROKEE II (WJ, WG) 4.0 4x4 (ERH) 3960ccm 190KM/140kW 1999/04-2005/09 4.7 V8 4x4 (EVA) 4701ccm 220KM/162kW 1999/04-2000/08 4.7 V8 4x4 (EVA) 4701ccm 223KM/164kW 1999/04-2005/09

Muffler to be welded in place of the original one.

The diameter of the pipe, dimensions of the muffler box and its length were selected to make the installation of the muffler as easy as possible.

Model: E002/60/450

If you plan to modify your exhaust system to a greater extent by also increasing the passage diameter compared to the original one, we recommend ordering a model with an increased passage diameter.

63.5 mm - model E002/63/450 70 mm - model E002/70/450 76 mm - model E002/76/450

However, if you want a more subdued sound, you can order a version with soundproofing, model EP002/60/450, available on another auction.

Or similarly, for the embossed version, other passage diameters: 63.5 mm - model E002/63/450 70 mm - model EP002/70/450 76 mm - model EP002/76/450

One side of the muffler with the port pipe exit moved.

The diameter of the through pipe is always the same both inside and outside the silencer.

We do not use tricks of swelling and expanding muffler stubs, where one muffler model is made into several models with different pipe diameters, but in fact the passage diameter remains the same.

The other side of the muffler with the central entry of the through pipe.

The muffler mounting side for a car is as above - central inlet/outlet moved a side.

For universal muffler use, the mounting side does not matter.

The muffler has a through-hole structure, soundproofed with stainless steel wool and glass mat resistant to 800 degrees Celsius (full hair glass mat - we do not use scraps).

Completely welded by a welding robot, hand finished.

Embossed, crack-resistant bottoms are used.

Fits

• Universal E002 elliptical silencer
• RM MOTORS JEEP COMMANDER V8 5.7 2006-2010 Silencer
• RM MOTORS JEEP CHEROKEE XJ 2.5/4.0 Muffler
• Muffler RM MOTORS JEEP Grand Cherokee WJ/WG 4.0 4.7

Specification

• Category: Mufflers
• Weight: 8.6 kg
• Manufacturer reference: E002/60/450