Photos shown for illustration; shade and shape may differ slightly.
MTS Technik Stance Coilover Kit - Volkswagen Polo VI, Seat Ibiza V, Skoda SCALA and others - MTSGWAU54-S
Supplier stock
MTS Technik coilover kit - series Stance. Built to balance road comfort with sporty handling. The kit uses high-grade materials and carries an advanced anti-corrosion finish.
⚙️ Technical specifications:
- Front axle lowering (FA): 15 - 50 mm
- Rear axle lowering (RA): 20 - 45 mm
- Max front axle load (FA): -1010 kg
- Max rear axle load (RA): -930 kg
- Front camber plates included: No
- Rear camber plates included: No
- TUV certificate: Yes
Vehicle compatibility:
| Make | Model / series | Engines and years |
|---|---|---|
| Audi | A1 Sportback (GB) | 25 TFSI (95 hp) [07/18 -] 30 TFSI (110 hp) [07/18 -] 30 TFSI (116 hp) [07/18 -] 35 TFSI (150 hp) [07/18 -] 40 TFSI (200 hp) [07/18 -] 40 TFSI (207 hp) [07/18 -] |
| Seat | IBIZA V (KJ) | 1.0 (65 hp) [01/17 -] 1.0 (75 hp) [01/17 -] 1.0 MPi (80 hp) [01/17 -] 1.0 TSI (110 hp) [01/17 -] 1.0 TSI (115 hp) [01/17 -] 1.0 TSI (95 hp) [01/17 -] 1.5 TSI (150 hp) [01/17 -] 1.6 TDI (115 hp) [01/17 -] 1.6 TDI (80 hp) [01/17 -] 1.6 TDI (95 hp) [01/17 -] |
| Skoda | SCALA (NW) | 1.0 TSI (110 hp) [02/19 -] 1.0 TSI (116 hp) [02/19 -] 1.0 TSI (95 hp) [02/19 -] 1.5 TSI (150 hp) [02/19 -] 1.6 TDI (116 hp) [02/19 -] 1.6 TDI (95 hp) [02/19 -] |
| Volkswagen | POLO VI (AW/BZ/AE) | 1.0 (65 hp) [06/17 -] 1.0 (75 hp) [06/17 -] 1.0 MPi (80 hp) [06/17 -] 1.0 TSI (110 hp) [06/17 -] 1.0 TSI (115 hp) [06/17 -] 1.0 TSI (95 hp) [06/17 -] 1.5 TSI (150 hp) [06/17 -] 1.6 MSi (110 hp) [06/17 -] 1.6 TDI (80 hp) [06/17 -] 1.6 TDI (95 hp) [06/17 -] 2.0 GTI (200 hp) [06/17 -] GTI (207 hp) [06/17 -] |
📌 Important notes:
- Height adjustable front and rear (threaded damper body at the front; dampers, springs and adjusters at the rear).
- For cars without electronically adjustable suspension only.
- If the car has factory sport suspension, the drop will be smaller than quoted.
- When fitting, check the clearance between tyre or wheel and damper. The minimum allowed is 5mm. If there is less, use certified wheel spacers.
- The rear adjuster fits at the top of the spring.
- To set the rear height more easily, take the adjuster off, move it on the spring and refit the assembly.