Photo shown for illustration; shade and shape may differ slightly.
Teroson VR 625 Rust Converter Spray, 400 ml
Available online
Teroson VR 625 converts rust (iron oxides) into a stable compound and leaves a resin film that can be sanded and can work as a primer. It is applied from an aerosol.
Specifications
| Type | rust converter, aerosol |
| Base | synthetic resin, solvent-based, free from phosphoric acid |
| Appearance | clear, slightly brownish liquid |
| Density | approx. 0.91 g/cm3 |
| Solids | approx. 27% |
| Thickness per coat | 0.1 to 0.2 mm |
| Coverage | approx. 0.25 l/m2 |
| Touch dry | approx. 20 minutes |
| Fully dry | 16 hours |
| Application temperature | 8 to 25 °C |
| Service temperature | -30 to +80 °C, short exposure (up to 1 hour) 100 °C |
| Storage | 24 months, at 10 to 25 °C, protected from frost |
| Pack | aerosol, 400 ml |
Where it is used
- For ferrous surfaces, in automotive maintenance and repair and in industry.
- As the rust converts, the liquid turns through dark blue to brown-black.
- Spray from 20 to 30 cm, 2 or 3 thin coats, wet on wet, without runs.
- The surface must be clean and dry, free of loose rust, oil, grease and dust. Bare sheet steel is coated with a wash primer first.
- The dried film can be painted over after about 16 hours with most industrial and repair paints. Sand it first for adhesion.
- Not for parts exposed to high temperatures, such as an exhaust.
Teroson VR 625 Rust Converter Spray, 400 ml
Sale price66,00 lei